Totally enclosed cabinet with maximum viewing area and interlocked door.
Ability to continue cycle after door-opening interruption
8 Station Tool Changer
3-jaw Chuck 100mm
Spindle Bore 21mm
Siemens Controller which is widely used in Schools and Industry
Post Processor for the Siemens Controller used to communicate with the EduCAM Software
Single seat EduCAM Turning
Tooling Package includes:
Turning Tool, Boring Bar, Neutral Turning Tool, Parting-off Tool, Centre Drill, Stub Drill 3mm, 4mm and 5mm
The shank of the tools 8mm x 8mm
Swing over bed: 200mm
Weight: 180kgs
Mains Isolator
Machine lighting
Swarf brush, keys and spanners
Interlocking USB cable ( machine to PC)
Operator’s Hand Book
Working Area:
Swing over Bed 200mm
Travel across slide 90mm
Centre distance 280mm
Spindle:
Chuck size 100mm
Spindle speed 100-3000 r/min
Spindle bore 21mm
Spindle taper MT3
Spindle motor power 1100W
Feed:
X travel 125mm
Z travel 190mm
Fast move speed 2000mm/min
Fast feed speed 1000mm/min
Motor power 2n/m
Tool rest:
Tools 8
Tool dimension 8 x 8mm
Tailstock:
Tailstock taper MT1
Tailstock sleeve diameter 22mm
Tailstock travel 40mm
Added Value
The CNC lathe can be used as a standalone because it has its own built-in screen showing in real time the following features:
Tool in Turret
Actual Position of Tool in X and Z relative to part
All aspects of machine operation controlled Locally rather than through a PC ( so it can be used manually without a computer keyboard )
Controller (Siemens 808D) is a recognizable Industry Standard
Air Actuated Door
1.1kW Spindle Motor
100mm 3-Jaw Chuck
Spindle Bore 21mm
Siemens Controller Industry Standard
NOTE
The PC & Keyboard is not supplied with the Xcalibur 280 CNC Lathe.
The minimum PC specification is Pentium i3
NB: One day’s training on site
The Xcalibur 260 CNC Lathe should be placed on a sturdy even bench where it will be operated. The table should ideally be 6ft long x 3ft wide to also accommodate the PC and Monitor
NNB:
It’s absolutely essential that a dedicated stand-alone PC be made available for the CNC Lathe and to ensure that absolute Administrator Rights are sanctioned so that when our Training Instructor is loading the Operating Software to the PC he will not be stopped by embedded Passwords. The PC is NOT to be linked to the School Network.
The Bench required should have a wooden top 40mm approx thick on top of a Heavy Duty, braced framework.
Length of the Bench 2000mm
Width of the Bench minimum of 900mm
Place the machine on a sturdy even bench where it will be operated. Uneven surfaces can lead to permanently warping the machine bed and should be avoided. However, there are height adjusters under the machine which our CNC Training Instructor will align when on site for training. Ensure the load rating of the table can support the machine weight. The table should be 6ft long x 3ft wide to also accommodate the PC and Monitor
EN 12478:2001, Safety of machine-tool _ Manually controlled turning machines with or without automatic control is within the Scope of this International Standard.
European Community Directive
98/37/CE / 89/336/CCE electromagnetic compatibility
European Community Directive 73/23/CEE – safety of the electric material for low tension.