Xcalibur CNC 260 Lathe

Code: XC260CNC
16,125.00 ex VAT

Give us a call




Features:
Totally enclosed cabinet with maximum viewing area and interlocked door.
Ability to continue cycle after door-opening interruption
8 Station Tool Changer
3-jaw Chuck 100mm
Spindle Bore 21mm
Siemens Controller which is widely used in Schools and Industry
Post Processor for the Siemens Controller used to communicate with the EduCAM Software
Single seat EduCAM Turning


Tooling Package includes:


Turning Tool, Boring Bar, Neutral Turning Tool, Parting-off Tool, Centre Drill, Stub Drill 3mm, 4mm and 5mm
The shank of the tools 8mm x 8mm
Swing over bed: 200mm
Weight: 180kgs
Mains Isolator
Machine lighting
Swarf brush, keys and spanners
Interlocking USB cable ( machine to PC)
Operator’s Hand Book 

Working Area:
Swing over Bed               200mm
Travel across slide          90mm
Centre distance               280mm


Spindle:
Chuck size                      100mm
Spindle speed                 100-3000 r/min
Spindle bore                    21mm
Spindle taper                   MT3
Spindle motor power       1100W


Feed:
X travel                             125mm
Z travel                             190mm
Fast move speed              2000mm/min
Fast feed speed                1000mm/min
Motor power                      2n/m


Tool rest:
Tools                                  8
Tool dimension                   8 x 8mm


Tailstock:
Tailstock taper                    MT1
Tailstock sleeve diameter   22mm
Tailstock travel                    40mm



Added Value
The CNC lathe can be used as a standalone because it has its own built-in screen showing in real time the following features:


Tool in Turret
Actual Position of Tool in X and Z relative to part
All aspects of machine operation controlled Locally rather than through a PC ( so it can be used manually without a computer keyboard )
Controller (Siemens 808D) is a recognizable Industry Standard
Air Actuated Door
1.1kW Spindle Motor
100mm 3-Jaw Chuck
Spindle Bore 21mm
Siemens Controller Industry Standard


NOTE
The PC & Keyboard is not supplied with the Xcalibur 280 CNC Lathe.
The minimum PC specification is Pentium i3




NB: One day’s training on site
The Xcalibur 260 CNC Lathe should be placed on a sturdy even bench where it will be operated. The table should ideally be 6ft long x 3ft wide to also accommodate the PC and Monitor




NNB:
It’s absolutely essential that a dedicated stand-alone PC be made available for the CNC Lathe and to ensure that absolute Administrator Rights are sanctioned so that when our Training Instructor is loading the Operating Software to the PC he will not be stopped by embedded Passwords. The PC is NOT to be linked to the School Network. 
 
The Bench required should have a wooden top 40mm approx thick on top of a Heavy Duty, braced framework.
Length of the Bench 2000mm
Width of the Bench minimum of 900mm 


Place the machine on a sturdy even bench where it will be operated. Uneven surfaces can lead to permanently warping the machine bed and should be avoided.  However, there are height adjusters under the machine which our CNC Training Instructor will align when on site for training.  Ensure the load rating of the table can support the machine weight. The table should be 6ft long x 3ft wide to also accommodate the PC and Monitor


EN 12478:2001, Safety of machine-tool _ Manually controlled turning machines with or without automatic control is within the Scope of this International Standard.

European Community Directive 
98/37/CE / 89/336/CCE electromagnetic compatibility
European Community Directive 73/23/CEE – safety of the electric material for low tension.