The FI-1332GSM is a Professional quality geared head lathe for industry and education. It incorporates a fully enclosed oil bath gearbox with provision for cutting metric screw thread pitches. It features a comprehensive H/L speed range and a bore of 38mm through the head to cater for a variety of application. The 1.1Kw 400V motor powers the unit and 24V controls for operator safety. Additional safety features include a Foot-operated brake/switch and interlocking guarding. A host of additional accessories are included in the standard package which makes this one of the most affordable lathes in its price bracket.
Specification:
All metric indexing.
Main Motor 1.5HP 400V
330mm Swing (450mm over gap)
Swing over cross slide 198mm
Bed Width 181mm
810mm between centres
Spindle Bore 38.1mm
Spindle Nose Taper 3MT
Chuck Guard w/ Microswitch
Leadscrew Cover
Weight 600Kgs
Machine Package:
Integrated Cooling system (Pump, tank and fittings)
Quick change tool-post w/ spare toolholders
Three jaw self-centering chuck, c.160 mm w/ key and set of reversible jaws.
Four jaw independent chuck, c. 200 mm w/ key.
Morse taper centres – one live centre and one dead centre.
Face plate, 305 mm.
Travelling steady, and fixed steady – 3 point.
Angle poise low voltage lamp
13mm Drill Chuck
Arbor for Drill Chuck
Set of spanners.
Operator handbook.
Set of anti-vibration pads
Optional Extras
Tooling Package
Parting-off Block & Blade
Parting Inserts (10)
Boring Bar
Turning Inserts (10)
Toolholder
Inserts (10)
Price………………………………………….. On Application
2-Axes Digital Read Out ……………… On Application *
*Must be supplied and fitted prior to machine despatch
Specification:
All metric indexing.
Main Motor 1.5HP 400V
330mm Swing (450mm over gap)
Swing over cross slide 198mm
Bed Width 181mm
810mm between centres
Spindle Bore 38.1mm
Spindle Nose Taper 3MT
Chuck Guard w/ Microswitch
Leadscrew Cover
Weight 600Kgs
Machine Package:
Integrated Cooling system (Pump, tank and fittings)
Quick change tool-post w/ spare toolholders
Three jaw self-centering chuck, c.160 mm w/ key and set of reversible jaws.
Four jaw independent chuck, c. 200 mm w/ key.
Morse taper centres – one live centre and one dead centre.
Face plate, 305 mm.
Travelling steady, and fixed steady – 3 point.
Angle poise low voltage lamp
13mm Drill Chuck
Arbor for Drill Chuck
Set of spanners.
Operator handbook.
Set of anti-vibration pads
Optional Extras
Tooling Package
Parting-off Block & Blade
Parting Inserts (10)
Boring Bar
Turning Inserts (10)
Toolholder
Inserts (10)
Price………………………………………….. On Application
2-Axes Digital Read Out ……………… On Application *
*Must be supplied and fitted prior to machine despatch