£
€
The Sedgwick CP planer thicknesser is designed and built for precision, long life and minimum maintenance. Its rigid mainframe assembly gives exceptional stability, and accurately houses the feed and cutterblock bearings, and the surface and thickness tables.
The Cutterblock
The machine is supplied as standard with a four knife TERSA cutterblock, providing improved finish, quieter running, and minimum set-up times. Double sided knives are available in a range of compositions for different applications.
Surface Planing
The cast infeed table rises and falls in square gibs for long term accuracy, and is fitted with a rule and vertical lock. A generously proportioned cast iron fence is then mounted off the outfeed table on a rack and pinion. The fence can be tilted between 90º - 45º making it suitable for bevel work and chamfering, and is easily returned to 90º via a positive stop. Adjustable shaw guards are also supplied.
Thicknessing
For long term accuracy, and to avoid time consuming mode changes, the surfacing tables remain in place when thicknessing, utilising instead a dual function chip collection hood. The thicknessing table is cast iron and mounted on a large diameter precision ground pillar to ensure precise and parallel positioning, with an off-centre lock for added rigidity. Extension rollers at either end run in self-lubricating bushes. Large diameter steel feed rollers (one fluted the other rubber coated) are driven by an independent motor and gear unit, which on three phase machines has two speeds. The feed rollers run in self-lubricating bushes and are driven from the geared unit by a heavy duty chain for efficient and constant feeding of demanding production work and difficult stock.
Safety Features
Front & rear cutterblock guards
Totally enclosed drive assembly
Electro-magnetic braked motor
Thermal overload NVR protection
Lock off emergency stop button
Lockable isolator
Kick STOP
Optional Extras
SPIRAL cutterblock equipped with four sided tungsten carbide cutters, which further enhances the machine’s performance and efficiency.
Multiple sized bridge guards, additional overturning fence for thin work pieces.
SURFACE / THICKNESSING WIDTH
410mm
THICKNESSING DEPTH
230mm
SURFACE TABLE LENGTH
1700mm
INFEED TABLE LENGTH
850mm
SURFACE TABLE HEIGHT
940mm
THICKNESSING TABLE LENGTH
600mm
TABLE LENGTH OVER EXTN ROLLERS
1000mm
CUTTERBLOCK DIAMETER
100mm
CUTTERBLOCK KNIVES
4 (Std TERSA)
CUTTERBLOCK SPEED
4000 rpm
FEED ROLLER DIAMETER
51mm
FEED SPEEDS
3 PHASE 4.5 & 7m/min;
FENCE SIZE
900 x 140mm
TILTING ANGLE OF FENCE
0 ° – 45°
CHIP EXTRACTION OUTLET DIA.
150mm
AIR VOLUME REQUIRED
1445 CMH
VOLTAGE / FREQUENCY
3 PHASE + EARTH ; 400/230 V – 50/60 Hz 1 PHASE + N + EARTH ; 230V / 50/60 Hz
CUTTERBLOCK MOTOR RATING
3 PH 4.0Kw IE2 (S1) 1 PHASE 3.8 Kw
FEED MOTOR RATING
0.375 Kw
MOTOR FULL LOAD CURRENT IN AMPS
3 PH C’BLOCK 8.0A 1 PH C’BLOCK 16.5A 3 PH FEED 1.5/1.3A
STARTING CURRENT IN AMPS
3 PH 48 / 1 PH 99A
REQUIRED FUSE SIZE IN AMPS
3 PHASE 20A/ph; 1 PHASE 40A
REQUIRED CABLE SIZE
3 PH 2.5 / 1 PH 4mm2
PACKED DIMENSIONS LxWxH
1700 x 850 x 1100
NETT WEIGHT
430Kg
The Cutterblock
The machine is supplied as standard with a four knife TERSA cutterblock, providing improved finish, quieter running, and minimum set-up times. Double sided knives are available in a range of compositions for different applications.
Surface Planing
The cast infeed table rises and falls in square gibs for long term accuracy, and is fitted with a rule and vertical lock. A generously proportioned cast iron fence is then mounted off the outfeed table on a rack and pinion. The fence can be tilted between 90º - 45º making it suitable for bevel work and chamfering, and is easily returned to 90º via a positive stop. Adjustable shaw guards are also supplied.
Thicknessing
For long term accuracy, and to avoid time consuming mode changes, the surfacing tables remain in place when thicknessing, utilising instead a dual function chip collection hood. The thicknessing table is cast iron and mounted on a large diameter precision ground pillar to ensure precise and parallel positioning, with an off-centre lock for added rigidity. Extension rollers at either end run in self-lubricating bushes. Large diameter steel feed rollers (one fluted the other rubber coated) are driven by an independent motor and gear unit, which on three phase machines has two speeds. The feed rollers run in self-lubricating bushes and are driven from the geared unit by a heavy duty chain for efficient and constant feeding of demanding production work and difficult stock.
Safety Features
Front & rear cutterblock guards
Totally enclosed drive assembly
Electro-magnetic braked motor
Thermal overload NVR protection
Lock off emergency stop button
Lockable isolator
Kick STOP
Optional Extras
SPIRAL cutterblock equipped with four sided tungsten carbide cutters, which further enhances the machine’s performance and efficiency.
Multiple sized bridge guards, additional overturning fence for thin work pieces.
SURFACE / THICKNESSING WIDTH
410mm
THICKNESSING DEPTH
230mm
SURFACE TABLE LENGTH
1700mm
INFEED TABLE LENGTH
850mm
SURFACE TABLE HEIGHT
940mm
THICKNESSING TABLE LENGTH
600mm
TABLE LENGTH OVER EXTN ROLLERS
1000mm
CUTTERBLOCK DIAMETER
100mm
CUTTERBLOCK KNIVES
4 (Std TERSA)
CUTTERBLOCK SPEED
4000 rpm
FEED ROLLER DIAMETER
51mm
FEED SPEEDS
3 PHASE 4.5 & 7m/min;
FENCE SIZE
900 x 140mm
TILTING ANGLE OF FENCE
0 ° – 45°
CHIP EXTRACTION OUTLET DIA.
150mm
AIR VOLUME REQUIRED
1445 CMH
VOLTAGE / FREQUENCY
3 PHASE + EARTH ; 400/230 V – 50/60 Hz 1 PHASE + N + EARTH ; 230V / 50/60 Hz
CUTTERBLOCK MOTOR RATING
3 PH 4.0Kw IE2 (S1) 1 PHASE 3.8 Kw
FEED MOTOR RATING
0.375 Kw
MOTOR FULL LOAD CURRENT IN AMPS
3 PH C’BLOCK 8.0A 1 PH C’BLOCK 16.5A 3 PH FEED 1.5/1.3A
STARTING CURRENT IN AMPS
3 PH 48 / 1 PH 99A
REQUIRED FUSE SIZE IN AMPS
3 PHASE 20A/ph; 1 PHASE 40A
REQUIRED CABLE SIZE
3 PH 2.5 / 1 PH 4mm2
PACKED DIMENSIONS LxWxH
1700 x 850 x 1100
NETT WEIGHT
430Kg
